�糵����

STRATO® is a thermosetting material: it is significantly different from the PVB film (Polyvinyl butyral), which is a thermoplastic material. The EVA film creates three-dimensional bonds at molecular level during the lamination process. Furthermore, it is not sensitive to humidity and water, therefore it is not necessary to store it under controlled humidity and temperature conditions.

STRATO® is available in different colours and finishings and it is certified according to European (UNI EN ISO) and American (ANSI - SGCC – ASTM - UL) standards.

Product range:

• EXTRA CHIARO

Feature: Thanks to its outstanding clarity STRATO® EXTRA CHIARO allows a very high light transmission but on the other hand it also offers a full protection against UV radiations higher than 99% thus avoiding the fading of interior furnishings. It increases the stability of laminated glass and gives a sense of lightness and transparency to commercial and residential architecture.

• PLUS

Feature: STRATO® PLUS has a higher degree of smoothness and elasticity compared to STRATO® EXTRA CHIARO: this allows the customers to laminate special inserts such as LCD (Smart �糵����), PET or fabrics without problems of distortions or air bubbles ensuring, at the same time, the highest degree of transparency even with low temperature lamination.

• NATURAL UV

Feature: Thanks to its outstanding clarity, STRATO® NATURAL UV provides a completely natural and neutral-looking glass while providing exceptional durability when exposed to weathering conditions. It allows a total UV transmission for solar radiation with enhanced permeability for short wave UV A and UV B radiation: it transmits the full natural spectrum of solar radiation.

• LEGGERO

Feature: STRATO® LEGGERO provides a veiled frosted effect (light transmission 60-65%), creating a product that can be integrated into any architectural project without affecting its style.

• SATINATO

Feature: STRATO® SATINATO allows daylight (light transmission 20-25%) to cross naturally through the interiors of residential and commercial buildings, while at the same time safeguarding privacy.

• LATTE

Feature: STRATO® LATTE gives the glass a glossy, semi-opaque effect (light transmission 2%), allowing a glimpse of the shapes of objects. It captures and diffuses the light into the space, without creating reflections.

• BIANCO

Feature: STRATO® BIANCO is the best solution for designers who want to create bright, white, and opaque glass elements (light transmission 0%). STRATO® BIANCO ensures the maximum colour uniformity and UV shielding.

• NERO

Feature: STRATO® NERO can give surprising effects, ensuring a sophisticated and unique touch. It also gives the glass a uniform coverage (light transmission 0%).

• AZZURRO MEDITERRANEO

Feature: STRATO® AZZURRO MEDITERRANEO expresses the pride of supporting local brands and a renewed localism. A support to interpersonal relationships, a new human dimension; it allows light and color effects on both exterior facades and interior furnishings and is characterized by a transparent color and allows the glass to integrate itself into any architecture, adding an evocative touch.

• BRONZO SICILIA

Feature: a delicate color, to express comfort, kindness, human care. STRATO® BRONZO SICILIA is characterized by a transparent color and allows the glass to integrate into any architecture, adding an evocative touch. It allows light and color effects on both exterior facades and interior furnishings. Perfect for creating interesting atmospheres without losing visibility of the outside. It is characterized by a transparent color and allows the glass to integrate into any architecture, adding an evocative touch.

• GRIGIO DOLOMITI

Feature: A color that expresses the transition from global efficiency to local resilience, the disruption of global supply chains and the decoupling of economies. To express a new balance between daily working time and time for oneself, in this new world where past habits have been interrupted. It is characterized by a transparent color and allows the glass to integrate into any architecture, adding an evocative touch.

• VERDE TOSCANA

Feature: STRATO® VERDE TOSCANA responds to the new trends of sustainability, proximity to nature and routine changes: a revolution of what we do and how we do it. Expresses a new concept of home-office, integrated with nature. It is characterized by a transparent color and allows the glass to integrate into any architecture, adding an evocative touch.

• COLOUR STUDIO

Feature: the STRATO® Colour Studio range, consisting of 36 new interlayers, allows the execution of countless chromatic effects, thanks to the possibility of implementing a mix and match between the colors of the line. Satinal guarantees the combination EVA LAYER film + STRATO® Colour Studio for an excellent result, a shielding action against UV radiation and suitability for the use in outdoor environments.

• FRESCO

Feature: STRATO® FRESCO is a new generation of high-performance EVA film that uses the nanoparticle technology. It has been formulated to give efficient solar control properties to laminated safety glass compared to clear monolithic glass and conventional clear EVA films. It can replace low-emission glass (Low-E) because it reduces the heat transmission with the advantage of having a no fragile glass to handle: it is a cheaper solution in terms of processing, handling and purchasing.

• BIRD FRIENDLY

Feature: the first EVA interlayer that combines the benefits of laminated safety glass with a design that protects birdlife.  STRATO® has developed its proprietary and unique extrusion technology in order to design different types of patterns on the EVA film, including lines, dots and gradients which can be customized depending on the level of coverage achieve. It is possible to create a custom-made design.

Multi-level laminating oven with convection heating system. It can be combined with HST (Heat Soak Test)

Feature:

• Possibility of laminating EVA - PVB - SentryGlas without autoclave

• High flow rate hot air circulation heating system

• Rapid cooling system with fresh air circulation

• Maximum temperature uniformity with thermocouple control

• Vacuum circuit with highly efficient oil pumps

• Possibility to adjust the vacuum based on the type of materials

 

Standard models:

• 18/36 �糵���� dim. mm 1800x3600 (71"x142")

• 24/36 �糵���� dim. mm 2400x3600 (94"x142")

• 25/50 �糵���� dim. mm 2500x5000 (98"x197")

Contact information:

For inquiries please send an email at service@tkitaly.com

Laminating oven with one or more working surfaces (up to 4) and chambers (up to 2).

Feature:

• Heaters' supports with ceramic insulators
• Heaters placed above and below the working surface
• Vacuum circuits with high efficient and high capacity oil pumps (one for each working plane) for maximum process efficiency
• Possibility to adjust the vacuum based on the type of materials
• Hydraulic lifting table on request

Standard models:

• Lamijet 01
• Lamijet 02
• Lamijet 02-2C
• Lamijet 04
• Lamijet 04-2C

Contact information:

For inquiries please send an email at service@tkitaly.com

Laminating oven without autoclave. Conduction heating system.

Feature:

• Possibility of laminating EVA - PVB – SentryGlas with laminating cycles in less than an hour

• Electric conduction heating system and fast curing

• Maximum temperature uniformity and flexibility

• Temperature control over multiple independent zones

• Temperature regulation with thermocouple connected to a digital microprocessor

• Position photo-cell for automatic glass loading and unloading

• Fast cooling

 

Standard models:

• LE 200 �糵���� dim. mm 1000x2000 (39"x79")

• LE 300 �糵���� dim. mm 1800x3200 (71"x126")

• LE 400 �糵���� dim. mm 2100x4500 (83"x177")

• LE 500 �糵���� dim. mm 2500x4500 (98"x177")

Contact information:

For inquiries please send an email at service@tkitaly.com

By the chemical tempering it is possible to temper glass with thickness minimum 0,5 mm and also glass with particular geometric shape, maintaining a high optical quality.

Feature:

• Electrical heating

• Touch screen operator’s panel programmable

• Salts melting tank in thick stainless steel

• Energy lack security system - UPS

• Pre-heating hood

• Electromechanical glass lifting system

• Maximum temperature 500°C

 

Standard models:

• CT 75 max. glass dim. mm 600x550 (23”x21”)

• CT 200 max. glass dim. mm 2000x1000 (78”x39)

• CT 240 max. glass dim. mm 2000x1300 (78”x51”)

• CT 320 max. glass dim. mm 3200x2200 (126”x86”)

• CT 360 max. glass dim. mm 4000x2500 (157”x98”)

Contact information:

For inquiries please send an email at service@tkitaly.com

Heat Soak Test (HST) oven represents the ideal means to comply with the safety rules concerning the use of tempered glasses.

It prevents spontaneous breakage of tempered glass for excess nickel Sulphur inclusions.

 

Models:

• 300 �糵���� dimensions mm 3600x2000 (142”x79”)

• 400 �糵���� dimensions mm 4000x2000 (157”x79”)

• 450 �糵���� dimensions mm 4500x2500 (177”x99”)

• 500 �糵���� dimensions mm 5000x2800 (197”x110”)

• 600 �糵���� dimensions mm 6000x3300 (236”x130”)

Contact information:

For inquiries please send an email at service@tkitaly.com

The special TK convection system allows to temper any LOW-E glass available on the market.

Feature:

• Convection by hot air directly inside the heating chamber

• Pre-heating chamber with full convection system

• Ceramic rollers handling by double belts

• Every single zone is equipped with its thermocouple

• For each zone it is possible to set the set-point, the PID parameters, the alarms and the power percentage

• The plant is equipped with an energy-saving control - the “energy save” system - which allows, during the heating phase, to optimize the power absorption.

 

Models:

• 130/300 Bed size mm 1300x3000 (51”x118”)

• 160/360 Bed size dim. mm 1600x3600 (63”x142”)

• 180/360 Bed size dim. mm 1800x3600 (71”x142”)

• 230/360 Bed size dim. mm 2300x3600 (91”x142”)

• 230/450 Bed size dim. mm 2300x4500 (91”x177”)

• 250/360 Bed size dim. mm 2500x3600 (99”x142”)

• 250/450 Bed size dim. mm 2500x4500 (99”x177”)

• 280/500 Bed size dim. mm 2800x5000 (110”x197”)

• 330/600 Bed size dim. mm 3300x6000 (130”x236”)

Contact information:

For inquiries please send an email at service@tkitaly.com

The EASY TEMPER oven is designed for the flat small-sized glass with dimensions from 20x30mm up to 80×100 mm.

Feature:

• Highly productive

• Extremely reliable

• Low power consumption

• Easy setting of the processing parameters

 

Models:

• 35/65 Bed size mm 350x650 (14”x26”)

• 70/100 Bed size mm 700x1000 (28”x40”)

• 100/190 Bed size mm 1000x1900 (40”x75”)

• 100/240 Bed size mm 1000x2400 (40”x95”)

Contact information:

For inquiries please send an email at service@tkitaly.com

The ovens of the Star Temper series are designed to satisfy the requirements of small and medium sized glass companies while maintaining high production levels and granting maximum simplicity of the setting of the working parameters.

Feature:

The heating system can be radiant or combined convection and radiation heating systems.

 

Models:

• 13/24 Bed size mm 1300x2400 (51”x95”)

• 13/30 Bed size mm 1300x3000 (51”x118”)

Contact information:

For inquiries please send an email at service@tkitaly.com